Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Window Regulator on a Toyota Yaris

Model: Toyota Yaris Xp10 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Power window motor

See other generations:
Video tutorial

To replace the front window regulator motor on a Toyota Yaris, start by keeping the side window closed using a screwdriver, then remove the door panel, the soundproofing material, and the window regulator motor by unscrewing the screws and disconnecting the connector (this step was omitted in the video as it used a door already disassembled).

Position the new motor in the mechanism and screw in the screws; place the mechanism with the motor back into the door, aligning it with the holes and screw in the screws to secure it; align the holes of the slide with those of the door and screw in the screws to secure it; reconnect the connector to check its proper operation; at this point, you can remove the screwdriver from the window, lower it until the lower holes of the glass align with the holes of the slide, and screw in the screws to secure it. Finally, check the proper operation of the window regulator and reassemble everything.


Updated on 6 August 2026 by ScegliAuto


Related tutorials

How to Replace the Glass of the Wing Mirror on the Toyota Yaris?
How to Replace the Glass of the Wing Mirror on the Toyota Yaris?
Toyota Yaris (2005-2011 / Xp90) To replace the glass of the wing mirror on the Toyota Yaris, lever with an object at the bottom of the glass: once this operation is complete, you ca…
How to replace the rear wiper blade on the Toyota Yaris?
How to replace the rear wiper blade on the Toyota Yaris?
Toyota Yaris (2005-2011 / Xp90) To replace the rear wiper blade on the Toyota Yaris, fully lift it so that it does not touch the rear window: once the blade has been disconnected, r…
How to Replace the Window Regulator Motor in a Toyota Yaris?
How to Replace the Window Regulator Motor in a Toyota Yaris?
Toyota Yaris (1999-2005 / Xp10) In this tutorial, see how to remove the window regulator motor in the first series Toyota Yaris, an operation to perform in case of failure. For the …

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos