Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Dipped Beam Bulb on a Toyota Yaris

Model: Toyota Yaris Xp90 - Years 2005-2011
Part: Headlight bulb

This short video tutorial shows how to change the dipped beam bulb on a second-generation Toyota Yaris, produced from 2005 to 2011. First, open the bonnet. Next, remove the rubber cover located behind the front headlamp. Then, disconnect the wiring from the dipped beam bulb and move the metal clip that holds it in place. Finally, remove the old bulb and fit a new one by reversing the procedure. The required dipped beam bulb for this vehicle is H4.

Updated on 29 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Activate Automatic Night Mode on the Toyota Yaris MK2 Dashboard
How to Activate Automatic Night Mode on the Toyota Yaris MK2 Dashboard
Toyota Yaris (2005-2011 / Xp90) In this guide, see how to limit the brightness of the dashboard on the Toyota Yaris MK2 to activate automatic night mode: turn on the instrument pane…
Where are the low beam fuses located in the Toyota Yaris?
Where are the low beam fuses located in the Toyota Yaris?
Toyota Yaris (2011-2019 / Xp130) If the low beams of our Toyota Yaris have suddenly stopped working and the respective bulbs appear to be intact, we can check the status of the corre…
How to Know the Fuse Diagrams for a Toyota Yaris Hybrid
How to Know the Fuse Diagrams for a Toyota Yaris Hybrid
Toyota Yaris (2011-2019 / Xp130) The first fuse box of a Toyota Yaris Hybrid can be found inside the vehicle's cabin, located low on the left under the steering column; this box cont…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos