Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Dipped Beam Bulb on a Toyota Yaris

Model: Toyota Yaris Xp90 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Headlight bulb

See other generations:
Video tutorial

This short video guide explains how to change the dipped beam bulb (H4) on a second-generation Toyota Yaris, produced from 2005 to 2011. First, open the bonnet, then remove the bulb connector from behind the headlamp and the rubber cover. After that, remove the retaining clip that holds the dipped beam bulb in place and take out the bulb.

Install a new bulb and reassemble everything by reversing the procedure. Repeat the operation on the other headlamp and you are finished.


Updated on 29 June 2026 by ScegliAuto


Related tutorials

How to Replace the Dipped Beam Bulb on a Toyota Yaris?
How to Replace the Dipped Beam Bulb on a Toyota Yaris?
Toyota Yaris (2005-2011 / Xp90) To replace the dipped beam bulb on your Toyota Yaris, start by opening the bonnet and securing it with the prop rods. Locate the headlamp where the b…
How to Replace the Dipped Beam Bulb of the Toyota Yaris?
How to Replace the Dipped Beam Bulb of the Toyota Yaris?
Toyota Yaris (1999-2005 / Xp10) For those who own a Toyota Yaris like the one in the video, here is how to replace the dipped beam bulbs without going to a garage, doing it yourself…
How to Replace the Dipped Beam Bulb on a Toyota Yaris
How to Replace the Dipped Beam Bulb on a Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) This short video tutorial shows how to change the dipped beam bulb on a second-generation Toyota Yaris, produced from 2005 to 2011. First, open the b…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos