Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Pump on a Toyota Yaris

Model: Toyota Yaris Xp90 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Fuel pump

See other generations:
Video tutorial

To replace the fuel pump on a Toyota Yaris, you need to remove the rear seat of the car to access the components underneath: here you will find the protective cover of the pump, which must be removed to access the fuel pump. The pump can be removed from its housing by unscrewing the fixing screws and disconnecting the appropriate tubes and power cables: once the old pump is removed, you can insert the new replacement part, reassembling all the components removed earlier.


Updated on 8 August 2026 by ScegliAuto


Related tutorials

Removing the Fuel Pump from the Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) In today's tutorial video, you will see the steps that will allow you to remove and replace the fuel pump or float of the Toyota Yaris. First, open t…
Removing the Fuel Pump from a Toyota Yaris 1.0 Petrol
Removing the Fuel Pump from a Toyota Yaris 1.0 Petrol
Toyota Yaris (1999-2005 / Xp10) Today we will see how to remove and replace the fuel pump of a first series 1.0 Petrol Toyota Yaris. First, recline the front seats and the rear seat…
How to replace the fuel filter of the Toyota Yaris.
How to replace the fuel filter of the Toyota Yaris.
Toyota Yaris (2005-2011 / Xp90) In this brief guide, we will see the instructions that will allow us to disassemble and replace the fuel filter of the Toyota Yaris. First, let's ope…

Other guides you may be interested in

    Frequently Asked Questions

    • Yaris 2005-2011 - Where is the fuel pump relay located in the Toyota Yaris? Read answer

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos