Do it yourself
Frequently asked questions about cars and motorcycles

How to disassemble the fuel pump on Toyota Yaris

Model: Toyota Yaris Xp90 - Years 2005-2011
Part: Fuel pump

How to disassemble the fuel pump on Toyota Yaris? To begin we disconnect the battery cables, then, we remove the rear seat seats of the car. Unscrew the tightening screws of the metal cap with a socket wrench, remove it from its seat, use absorbent paper around the perimeter to plug any liquid leaks. Unscrew the large locking pin of the fuel pump with a chisel, disconnect the power supply terminals and the liquid circulation pipes. We extract the floating fuel pump from its seat with attached pieces. Finally we reassemble a new piece.


Posted on 19 October 2023 by ScegliAuto



Toyota Yaris fuel pump disassembly
Toyota Yaris (2005-2011 / Xp90) In today's video tutorial we will see the steps that will allow us to disassemble and replace the fuel pump or float on the Toyota Yaris. First of al
Toyota Yaris fuel pump disassembly
Toyota Yaris (2005-2011 / Xp90) In today's video tutorial we will see how to disassemble the fuel pump of a Toyota Yaris. Then we will go to disassemble the rear bench as the pump i
How do you replace the fuel pump of the Toyota Yaris?
Toyota Yaris (2005-2011 / Xp90) In order to replace the fuel pump of the Toyota Yaris, you need to remove the rear seat of the car so that you can access the underlying components.

Other guides that may interest you

    Frequently Asked Questions

    • Yaris 2011-2019 - Where can I find the inertia switch on the Toyota Yaris? Read Answer

How to deactivate the safe lock on a Volkswagen Golf.

The safe lock is indeed an anti-theft system that prevents thieves from accessing the car. This device locks the doors, both externally and internally, when the driver activates the central locking remote control after leaving the vehicle. To permanently disable it, it is necessary to use a diagnostic program such as VCDS that we will connect to the vehicle through the ODBII port. Then wait for the connection and recognition of the control unit and then select the blocks present and locate the safe lock to disable it. And the job will be completed.

Watch the video!


by ScegliAuto

More videos