Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Yaris
    4. : How to change the fuel filter on Toyota Yaris

Toyota Yaris - Video tutorial

Model: Toyota Yaris Xp90 - Years 2005-2011
Part: Petrol filter
Operation: How to change the fuel filter on Toyota Yaris

How do I change the filter in the fuel pump on Yaris? Let's see how to remove the filter in the fuel pump. We remove the seats from the rear seats of the car. Unscrew the tightening screws of the metal cap with a socket wrench, remove it from its seat, use absorbent paper around the perimeter to absorb leaks. Unscrew the fuel pump, disconnect the power supply terminals and the liquid circulation pipes. We extract the floating fuel pump from its seat. We disassemble the filter placed on it. We mount the new filter above the pump.


Posted on 17 December 2023 by ScegliAuto

    Frequently Asked Questions

    • Yaris 2005-2011 - Where is the fuel filter located on the Toyota Yaris? Read Answer
    • Yaris 2011-2019 - Where is the Toyota Yaris fuel filter located? Read Answer
    • Yaris 2005-2011 - Where is the 2007 Toyota Yaris fuel filter located? Read Answer
    • Yaris 2011-2019 - Where is the fuel filter located on a Toyota Yaris? Read Answer
    • Yaris 2011-2019 - Where is the petrol filter of my Toyota Yaris with 1.0 engine located? Read Answer
    • Yaris 1999-2005 - Where is the Toyota Yaris 1.0 petrol filter located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos