Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Top Up the Windscreen Washer Fluid in a Toyota Yaris

Model: Toyota Yaris Xp130 - Years 2011-2019
Part: Checks and maintenance

Before you start, open the front bonnet of your Toyota Yaris. Begin by unclipping and removing the cap from the washer fluid reservoir, located in the lower right corner of the engine bay. Next, insert the funnel into the reservoir opening. Once done, pour the washer fluid until the reservoir is full. When you have completely filled the reservoir, remove the funnel from the opening. After removing the funnel, reclip the reservoir cap, and you will have completed the procedure.

Updated on 21 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Top Up the Coolant in the Toyota Yaris?
How to Top Up the Coolant in the Toyota Yaris?
Toyota Yaris (2011-2019 / Xp130) In this tutorial, you will see how to top up the coolant in the Toyota Yaris, a very simple operation to be performed periodically based on both need…
How to Top Up the Coolant in a Toyota Yaris XP10
How to Top Up the Coolant in a Toyota Yaris XP10
Toyota Yaris (1999-2005 / Xp10) In this video, you will learn how to refill the coolant reservoir of a Toyota Yaris XP10. The reservoir cap is easily located by opening the front bo…
How to top up the coolant in the Toyota Yaris XP90
How to top up the coolant in the Toyota Yaris XP90
Toyota Yaris (2005-2011 / Xp90) In this video we can see how to top up the coolant of a Toyota Yaris XP90: it is very important to get the right liquid: visually it must be the same…

    Frequently Asked Questions

    • Yaris 2020-2027 - What problems does the 2020 Toyota Yaris Hybrid have? Read answer
    • Yaris 2005-2011 - Where is the 2010 Toyota Yaris jack located? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos