Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the starter motor of the Toyota Yaris?

Model: Toyota Yaris Xp90 - Years 2005-2011
Part: Starter motor

In order to replace the starter motor of the Toyota Yaris, you need to lift the car with a jack so that you can access the components located in the lower part of the engine compartment: here you will find the starter motor right next to the engine block, near the flywheel. To remove the starter motor from its housing, you will need to disconnect the connector and loosen the screws that secure it; this way you can insert the new replacement starter motor, fixing and connecting it properly, and then checking that everything works correctly.

Posted on 5 July 2024 by ScegliAuto

Video tutorial

Related tutorials

Where is the starter motor located in the Toyota Yaris?
Where is the starter motor located in the Toyota Yaris?
Toyota Yaris (2005-2011 / Xp90) In this video, you can see where the starter motor is located in the Toyota Yaris and how to proceed if you need to replace it, a relatively simple o…
How to Replace the Starter Motor on a Toyota Yaris?
How to Replace the Starter Motor on a Toyota Yaris?
Toyota Yaris (2005-2011 / Xp90) To replace the starter motor on a Toyota Yaris, open the bonnet to access the components inside the engine bay. You will need to loosen the mounting …
How to Remove a Starter Motor on a Toyota Yaris
How to Remove a Starter Motor on a Toyota Yaris
Toyota Yaris (1999-2005 / Xp10) Here’s how to remove a starter motor on a Toyota Yaris. First, disconnect the battery cables using a socket wrench. Lift the vehicle with a column li…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos