Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the starter motor on the Toyota Yaris VVT-I

Model: Toyota Yaris Xp90 - Years 2005-2011
Part: Starter motor

Today, let's discover the main instructions on how to remove and replace the starter motor on the Toyota Yaris VVT-I. First, open the vehicle's bonnet and disconnect the battery terminals; then lift the vehicle to unscrew the fixing screws of the starter motor, disconnecting the electrical wiring to remove it, as shown in the video. At this point, replace the starter motor with the new original one, making the connection; all that remains is to reconnect the battery terminals and check the engine starts!

Posted on 17 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the starter motor of the Toyota Yaris
Replacement of the starter motor of the Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) The following steps will show us how to disassemble and replace the starter motor of the Toyota Yaris. First, we open the engine hood of the car and …
Where to find and how to test the fuse and relay of the starter motor of the Toyota Yaris.
Where to find and how to test the fuse and relay of the starter motor of the Toyota Yaris.
Toyota Yaris (2011-2019 / Xp130) The video shows the location and test of the fuse and relay of the starter motor of a Toyota Yaris: both are located in the engine compartment, insid…
How do you replace the starter motor of the Toyota Yaris?
How do you replace the starter motor of the Toyota Yaris?
Toyota Yaris (2005-2011 / Xp90) In order to replace the starter motor of the Toyota Yaris, you need to lift the car with a jack so that you can access the components located in the …

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos