Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the starter motor of a Toyota Yaris XP90

Model: Toyota Yaris Xp90 - Years 2005-2011
Part: Starter motor

In this video we see how to remove the starter motor of the Toyota Yaris XP90. We see it from the bottom of the car, next to the oil filter, and it is secured to the brackets with two 14 mm bolts. Once removed from the bracket, we will have to try to remove it from the top of the engine, because we will have to remove the 12 mm bolt that holds the top in place and then the electrical connector that connects the device to the car's electrical system. The connector is located quite deep inside compared to the starter motor, and therefore is not easily accessible. Then just pull up the device and it's done.

Posted on 22 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the starter motor of the Toyota Yaris?
How do you replace the starter motor of the Toyota Yaris?
Toyota Yaris (2005-2011 / Xp90) In order to replace the starter motor of the Toyota Yaris, you need to lift the car with a jack so that you can access the components located in the …
Where is the starter motor located in the Toyota Yaris?
Where is the starter motor located in the Toyota Yaris?
Toyota Yaris (2005-2011 / Xp90) In this video, you can see where the starter motor is located in the Toyota Yaris and how to proceed if you need to replace it, a relatively simple o…
How to Replace the Starter Motor on a Toyota Yaris
How to Replace the Starter Motor on a Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) To replace the starter motor on a Toyota Yaris, open the bonnet to access the components inside the engine bay. You will need to remove the battery a…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos