Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Starter Motor on the Toyota Yaris

Model: Toyota Yaris Xp90 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Starter motor

See other generations:
Video tutorial

If you want to proceed with removing and replacing the starter motor on this vehicle, you can find useful information and steps in the description below and in the video. Once you open the bonnet, locate the starter motor, which is situated under the gear and clutch levers.

It is advisable to remove the battery for more space. Using a 14mm spanner, remove the upper mounting bolt.

To remove the other bolt, you will need to lift the vehicle and access it from underneath the engine bay. Finally, disconnect the electrical connector, and at this point, you will be able to remove the starter motor.


Updated on 17 July 2026 by ScegliAuto


Related tutorials

Replacing the Starter Motor on a Toyota Yaris
Replacing the Starter Motor on a Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) The following steps will show how to disassemble and replace the starter motor on a Toyota Yaris. First, open the bonnet of the vehicle and disconnec…
How to replace the starter motor on the Toyota Yaris?
How to replace the starter motor on the Toyota Yaris?
Toyota Yaris (2005-2011 / Xp90) To replace the starter motor on the Toyota Yaris, lift the car with a jack to access the components located at the bottom of the engine bay. Here you…
How to Replace the Starter Motor on a Toyota Yaris?
How to Replace the Starter Motor on a Toyota Yaris?
Toyota Yaris (2005-2011 / Xp90) To replace the starter motor on a Toyota Yaris, open the bonnet to access the components inside the engine bay. You will need to loosen the mounting …

Other guides you may be interested in

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos