Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Starter Motor on a Toyota Yaris?

Model: Toyota Yaris Xp90 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Starter motor

See other generations:
Video tutorial

To replace the starter motor on a Toyota Yaris, open the bonnet to access the components inside the engine bay. You will need to loosen the mounting bolts and disconnect the power cables connected to the battery. The battery must then be removed from its housing to access the starter motor underneath.

Release the starter motor by unscrewing the bolts that secure it and disconnecting the power cables, allowing it to be replaced with a new one. After the replacement, reinstall the battery.


Updated on 16 July 2026 by ScegliAuto


Related tutorials

How to replace the starter motor on the Toyota Yaris?
How to replace the starter motor on the Toyota Yaris?
Toyota Yaris (2005-2011 / Xp90) To replace the starter motor on the Toyota Yaris, lift the car with a jack to access the components located at the bottom of the engine bay. Here you…
Replacing the Starter Motor on a Toyota Yaris
Replacing the Starter Motor on a Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) The following steps will show how to disassemble and replace the starter motor on a Toyota Yaris. First, open the bonnet of the vehicle and disconnec…
Where is the starter motor located in the Toyota Yaris?
Where is the starter motor located in the Toyota Yaris?
Toyota Yaris (2005-2011 / Xp90) In this video, you can see where the starter motor is located in the Toyota Yaris and how to proceed if you need to replace it, a relatively simple o…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos