Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Starter Motor on Yaris

Model: Toyota Yaris Xp90 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Starter motor

See other generations:
Video tutorial

Let's see how to remove the starter motor on a Yaris. Remove the starter motor from inside the engine compartment (front compartment).

Disconnect the battery power cables: remove the battery and the tray. Disconnect the power terminals of the starter motor with pliers or a screwdriver depending on the pressure of the tabs.

Detach the starter motor and remove it from the engine compartment (access from below to disconnect or unscrew other screws). Install the new starter motor by connecting the power cables and the associated securing screws.

Perform a test start of the car.


Updated on 30 March 2026 by ScegliAuto


Related tutorials

How to replace the starter motor on the Toyota Yaris?
How to replace the starter motor on the Toyota Yaris?
Toyota Yaris (2005-2011 / Xp90) To replace the starter motor on the Toyota Yaris, lift the car with a jack to access the components located at the bottom of the engine bay. Here you…
Replacing the Starter Motor on a Toyota Yaris
Replacing the Starter Motor on a Toyota Yaris
Toyota Yaris (2005-2011 / Xp90) The following steps will show how to disassemble and replace the starter motor on a Toyota Yaris. First, open the bonnet of the vehicle and disconnec…
Where is the starter motor located in the Toyota Yaris?
Where is the starter motor located in the Toyota Yaris?
Toyota Yaris (2005-2011 / Xp90) In this video, you can see where the starter motor is located in the Toyota Yaris and how to proceed if you need to replace it, a relatively simple o…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos