Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Power Battery on a Toyota Yaris Cross

Model: Toyota Yaris Cross MK 1 - Years 2020-2026
Part: Battery

Although the video tutorial provided is generic, it is also suitable for the Toyota Yaris Cross mentioned. The position of the 12-volt battery that powers the vehicle is the same, as it is located in the engine bay, so simply follow the instructions below for replacing the aforementioned battery: With the bonnet open and the instrument cluster turned off, disconnect the black cable first and then the red one, free the battery from its mounts and remove it from its location. The installation of the new battery will follow the reverse procedure of what has been stated so far.

Posted on 3 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the battery of the Toyota Yaris Cross remote control?
How do you replace the battery of the Toyota Yaris Cross remote control?
Toyota Yaris Cross (2020-2026 / MK 1) In order to replace the battery of the Toyota Yaris Cross remote control, you will need to pry open the bottom of the device with an object. This wil…
Guide to replacing the 12V battery of the Toyota Yaris Cross
Guide to replacing the 12V battery of the Toyota Yaris Cross
Toyota Yaris Cross (2020-2026 / MK 1) Today we will see the main instructions that will allow us to disassemble and replace the 12V battery of the Toyota Yaris Cross. First, we open the r…
How to replace the remote battery in the Toyota Yaris Cross?
How to replace the remote battery in the Toyota Yaris Cross?
Toyota Yaris Cross (2020-2026 / MK 1) To replace the remote battery in the Toyota Yaris Cross, pull the lever located on the back of the device: this will allow you to extract the key fro…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos