Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Fiat
    3. :
  3. 500
    4. : How do you replace the cylinder head of the Fiat 500?

Fiat 500 - Video tutorial

Model: Fiat 500 312 - Years 2007-2022
Part: Engine head
Operation: How do you replace the cylinder head of the Fiat 500?

In order to replace the engine head, it will be necessary to remove the latter from its housing inside the engine compartment, so that you can have more room for maneuver. To remove the motor from its seat, it will be necessary to unscrew the screws that secure it to the relative supports: in this way, all the connectors can also be disconnected by completely removing the motor. Then it will be possible to unscrew the screws that secure the cylinder head by removing it completely from the top of the engine. In this way it will be possible to insert the new spare part, re-installing the motor inside its seat.


Posted on 15 May 2024 by ScegliAuto

    Frequently Asked Questions

    • 500 2014-2022 - How much does a used cylinder head cost for a Fiat 500 twin air 900? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos