Do it yourself
Frequently asked questions about cars and motorcycles

How to repair a comma on the ground on the Fiat 500X

Model: Fiat 500 500 X - Years 2014-2022
Part: Tires

In this video we can see how to repair a flat tire on the Fiat 500X: the tire repair kit can quickly and safely get us back home. It is located in the trunk, under the cargo floor. Find a safe, flat place, turn on the hazard lights and engage the handbrake. The valve stem of the flat tire should be close to the ground, then place the kit on the ground, near the valve, push the sealant bottle into the dedicated support of the compressor, unscrew the valve stem, remove the filling tube and tighten the connector on the tire valve, then connect the kit to the power outlet of the central console and start the engine, then start the compressor; the air and sealant will inflate the tire. Check the recommended pressure by the manufacturer on the sticker on the driver's side door jamb. (If the pressure does not hold after 15 minutes, disconnect the compressor from the valve, it means that the tire is too damaged). Drive the vehicle for 5 miles or 9 kilometers and recheck the pressure. Drive very carefully to the nearest tire shop, at a maximum speed of 80 km/h or 50 mph.

Posted on 23 July 2024 by ScegliAuto

Video tutorial

Related tutorials

Fiat 500 (2014-2022 / 500 X) On the Fiat 500X, the boot may become stuck, possibly due to a faulty control button or lock actuator. In such cases, you can still perform an emerge…
Fiat 500 (2014-2022 / 500 X) Here’s how to correctly use the tyre repair kit on a Fiat 500x: The maintenance kit is located under the rear load floor. If you have a flat tyre, st…
Fiat 500 (2014-2022 / 500 X) How do you replace the engine oil on a Fiat 500X? Follow this guide to proceed with the replacement: open the car door and pull up the engine bay rel…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos