|
Do it yourself
| |||
| ||||
How to disassemble and reassemble the trunk lining on a FIAT TIPO (356) 1.6 MULTIJETT
So, to disassemble and reassemble the trunk lining, armed with patience and a screwdriver. First, remove the floor panel by gently lifting it and setting it aside. Then remove the plastic fasteners, which are usually either pressure or have a central screw, along the edges of the lining. Be careful not to break them, you must be gentle. Now, remove the side panels, perhaps using a plastic lever to avoid leaving marks. If necessary, disconnect any light cables. If you need to replace the third brake light or the rear wiper motor, both can be found under this lining. To reassemble, do everything in reverse, make sure the panels fit well, reattach the fasteners, and put back the floor panel. Take a final look to see if everything is aligned and securely fastened. If you don't feel comfortable doing it on your own, contact a specialized mechanic.
Posted on 16 March 2025 by ScegliAuto
Video tutorial
Related tutorials
Fiat Tipo
(2016-2026 /
356, 357, 358)
In this short video, you will see how to disassemble and replace the battery in the remote key for the Fiat Tipo 356 by following these simple steps.…
Fiat Tipo
(2016-2026 /
356, 357, 358)
This guide explains how to remove and replace the bulbs of the rear headlamp on the second series Fiat Tipo, versions 356 and 357. First, open the bo…
Fiat Tipo
(2016-2026 /
356, 357, 358)
Today we will see the instructions that will allow us to disassemble the front and rear headrests of the Fiat Tipo, in simple and quick steps. First …
Other guides you may be interested in |
How to Open a Stuck Boot on the Peugeot 407?
On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.249
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
