|
Do it yourself
| |||
| ||||
How to Repair the Sunroof Drain of a Volkswagen Passat
Model: Volkswagen Passat
B6, 3C
- Years 2005-2010
Clogged sunroof drains are a common issue in older vehicles, such as this 2008 Volkswagen Passat: Water enters and is channeled through four tubes, one for each corner, draining it underneath the car. If these tubes become clogged, water accumulates and overflows inside the car, wetting the floor and the roof lining. Open the sunroof; in the front and rear corners of the frame, you will find holes (usually with a small plastic conduit) that are the drain inlets. Clean this area thoroughly, then unblock the tubes. The safest method is to gently insert a flexible wire into the drain; you will feel when it passes an obstruction: then move it back and forth to remove it, and pour some water into the drain to check that it flows quickly underneath the car. Alternatively, you could use a vacuum cleaner to pull out the obstruction instead of pushing it further in. You can also try using compressed air, but at a very low pressure, no more than 1/2 bar.
Posted on 3 June 2026 by ScegliAuto
Video tutorial
Related tutorials
Volkswagen Passat
(2005-2010 /
B6, 3C)
Below are the main instructions on how to remove and replace the roof lining of a Volkswagen Passat. First, get inside the cabin and start removing a…
Volkswagen Passat
(2010-2014 /
B7)
You can replace the panoramic roof on a Volkswagen Passat by prying off all the trim panels of the door pillars with a tool. This will also allow you…
Volkswagen Passat
(2010-2014 /
B7)
The instructions in this guide will illustrate the procedure for removing and replacing the headlining or interior roof lining of the Volkswagen Pass…
Other guides you may be interested in
|
How to Reset the Tyre Pressure Light on the Opel Grandland X
While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.056
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |