Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. I30
    4. : Manufacturer's coat of arms

Hyundai I30 - Manufacturer's coat of arms

Hyundai I30 (2016-2023 / PD, MK 3)
How to remove rear lettering from a hyundai i30
There are many people who do not appreciate the lettering on the car showing the make and model, especially on the rear. In this video we see how to easily …read all…
Posted on 25 December 2022 by ScegliAuto
Airbags (2) Loudspeaker (1) Car stereo (2) Battery (5) Spark plugs (1) Bodywork (1) Key (6) Timing belt (1) -board computer (3) Checks and maintenance (26) Dashboard (1) Gearshift gaiter (1) Headlight (4) Tail light (2) Fog lights (1) Air filter (2) Cabin air filter (2) Hand brake (2) Window lift switch (1) Light bulb (3) Headlight bulb (6) Rear light bulb (2) Interior lights ceiling light bulb (1) License plate light (1) Window motor (2) Gear oil (1) Door panel (1) Front bumper (1) Brake pads (1) Gear Shift Knob (2) Instrument cluster (10) Passenger compartment heating radiator (1) Fuse box (5) Seat (1) Outside rearview mirror (6) Manufacturer's coat of arms (1) Windscreen wipers (1) Central tunnel (1) Steering wheel (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos