Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. I30
    4. : Window motor

Hyundai I30 - Window motor

Hyundai I30 (2007-2012 / FD, MK 1)
How to replace the power window motor of the Hyundai I30.
In this video tutorial, we will see the steps on how to disassemble and replace the power window motor of the Hyundai I30, following the instructions below. …read all…
Posted on 4 April 2023 by ScegliAuto
Hyundai I30 (2011-2016 / MK 2, GD)
Replacing the window motor on Hyundai I30
To get to the window motor you will first need to remove the door panel. Remove the two plastic screw covers placed in the central handle and behind the …read all…
Posted on 24 February 2024 by ScegliAuto
Airbags (2) Loudspeaker (1) Car stereo (2) Battery (5) Spark plugs (1) Bodywork (1) Key (6) Timing belt (1) -board computer (3) Checks and maintenance (26) Dashboard (1) Gearshift gaiter (1) Headlight (4) Tail light (2) Fog lights (1) Air filter (2) Cabin air filter (2) Hand brake (2) Window lift switch (1) Light bulb (3) Headlight bulb (6) Rear light bulb (2) Interior lights ceiling light bulb (1) License plate light (1) Window motor (2) Gear oil (1) Door panel (1) Front bumper (1) Brake pads (1) Gear Shift Knob (2) Instrument cluster (10) Passenger compartment heating radiator (1) Fuse box (5) Seat (1) Outside rearview mirror (6) Manufacturer's coat of arms (1) Windscreen wipers (1) Central tunnel (1) Steering wheel (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos