Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. I30
    4. : Light bulb

Hyundai I30 - Light bulb

Hyundai I30 (2011-2016 / MK 2, GD)
How to replace the rear light bulb on Hyundai I30?
The replacement of the rear light bulb of the Hyundai I30 is carried out by lifting the tailgate, so that the two bolts located next to the headlight can be …read all…
Posted on 9 October 2022 by ScegliAuto
Hyundai I30 (2011-2016 / MK 2, GD)
How to replace the rear light bulb on Hyundai I30?
To be able to replace the bulbs of the rear light assembly of the Hyundai I30 you have to open the tailgate and remove its internal side cover, in …read all…
Posted on 10 March 2024 by ScegliAuto
Hyundai I30 (2007-2012 / FD, MK 1)
Here's how to replace the headlight bulb
The video guides us in replacing the blown headlight bulb. Start by unscrewing the fixing screws indicated in the guide, proceed with the extraction of the …read all…
Posted on 28 June 2023 by ScegliAuto
Airbags (2) Loudspeaker (1) Car stereo (2) Battery (5) Spark plugs (1) Bodywork (1) Key (6) Timing belt (1) -board computer (3) Checks and maintenance (26) Dashboard (1) Gearshift gaiter (1) Headlight (4) Tail light (2) Fog lights (1) Air filter (2) Cabin air filter (2) Hand brake (2) Window lift switch (1) Light bulb (3) Headlight bulb (6) Rear light bulb (2) Interior lights ceiling light bulb (1) License plate light (1) Window motor (2) Gear oil (1) Door panel (1) Front bumper (1) Brake pads (1) Gear Shift Knob (2) Instrument cluster (10) Passenger compartment heating radiator (1) Fuse box (5) Seat (1) Outside rearview mirror (6) Manufacturer's coat of arms (1) Windscreen wipers (1) Central tunnel (1) Steering wheel (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos