Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Headlight Bulb

Model: Hyundai I30 MK 1, FD - Years: 2007, 2008, 2009, 2010, 2011, 2012
Part: Light bulb

See other generations:
Video tutorial

The video guides you through replacing the burnt-out front headlight bulb. Start by unscrewing the securing screws indicated in the guide, then extract the optical unit and disconnect the two power connectors.

Remove the rubber cover and proceed to dismantle the bulb, replace it, and reposition the protective cover. Reconnect the connectors and test the correct functioning of the headlight; once done, proceed to reassemble the headlight unit.

The video also shows how to replace the bulbs of the front fog lights, which can be accessed from under the bumper. The car in the video is a Hyundai i30, but the procedure is similar for other vehicles.


Updated on 3 February 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Headlight Bulb on the Hyundai i30?
How to Replace the Rear Headlight Bulb on the Hyundai i30?
Hyundai I30 (2011-2016 / GD, MK 2) To replace the bulbs in the rear light cluster of the Hyundai i30, open the tailgate and remove the inner side cover corresponding to the light. Here…
How to Replace the Front Headlamp Bulb in a Hyundai i30?
How to Replace the Front Headlamp Bulb in a Hyundai i30?
Hyundai I30 (2016-2024 / MK 3, PD) To replace the front headlamp bulb in a Hyundai i30, open the bonnet to access the components inside the engine bay: here you can access the internal…
How to Remove the Front Headlamp Bulb on Hyundai i30
How to Remove the Front Headlamp Bulb on Hyundai i30
Hyundai I30 (2007-2012 / MK 1, FD) To replace the front headlamp bulb, you will need to remove the headlamp. This is a relatively simple operation as the headlamp is not recessed compa…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos