Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. I30
    4. : How to remove Hyundai I30 headlight bulb

Hyundai I30 - Video tutorial

Model: Hyundai I30 FD, MK 1 - Years 2007-2012
Part: Headlight bulb
Operation: How to remove Hyundai I30 headlight bulb

To replace the headlight bulb, the headlight will have to be removed: this is a very simple operation since the headlight is not undercut compared to the bumper, but it is necessary to unscrew some fixing screws of the matte to facilitate the extraction of the lighthouse itself; therefore, once the front hood has been opened, unscrew the three fixing screws of the headlight and those of the mask in order to extract the headlight from its seat; then remove the rare dust cap, disconnect the power socket and unhook the bulb fixing springs (H7) to be able to extract it and insert the new one, fixing it with the relative springs and reconnecting the power socket.


Posted on 3 September 2023 by ScegliAuto



How do you replace the front headlight bulb of the Hyundai I30?
Hyundai I30 (2016-2023 / PD, MK 3) In order to replace the front headlight bulb of the Hyundai I30, you need to open the hood so that you have access to the components located inside t
How to replace the rear light bulb on Hyundai I30?
Hyundai I30 (2011-2016 / MK 2, GD) The replacement of the rear light bulb of the Hyundai I30 is carried out by lifting the tailgate, so that the two bolts located next to the headlight
How to remove the left front headlight of the Hyundai I30
Hyundai I30 (2011-2016 / MK 2, GD) Today we will explain the steps to remove the left front headlight of the Hyundai I30. The first step is to open the front hood, pulling the lever ne

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos