Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Window Regulator Motor on a Hyundai i30

Model: Hyundai I30 GD, MK 2 - Years: 2011, 2012, 2013, 2014, 2015, 2016
Part: Power window motor

See other generations:
This video is currently unavailable

To access the window regulator motor, you first need to remove the door panel. Remove the two plastic covers located in the central handle and behind the opening handle.

Unscrew the two screws that were previously hidden and are now exposed, which hold the panel in place. Also remove the plastic triangle next to the window.

Insert a plastic trim tool into the gap around the panel and detach it bit by bit, pulling it out from the door, then disconnect the cables. At this point, the window regulator motor is exposed, and you can unscrew and remove it. Proceed in reverse for reassembly.


Updated on 21 April 2026 by ScegliAuto


Related tutorials

How to Dismantle the Window Regulator Motor and Side Glass on a Hyundai i30
How to Dismantle the Window Regulator Motor and Side Glass on a Hyundai i30
Hyundai I30 (2016-2024 / MK 3, PD) Today, we will go through the instructions to dismantle and replace the window regulator mechanism and side glass on a Hyundai i30. First, remove the…
How to Replace the Window Motor on a Hyundai i30
How to Replace the Window Motor on a Hyundai i30
Hyundai I30 (2007-2012 / MK 1, FD) In this video tutorial, follow the steps to remove and replace the window motor on a Hyundai i30, following the instructions below. First, open the f…
How to Replace the Power Steering Motor Gear on Hyundai I30
How to Replace the Power Steering Motor Gear on Hyundai I30
Hyundai I30 (2007-2012 / MK 1, FD) Follow these main instructions to remove and replace the power steering motor gear on a Hyundai I30. First, remove the plastic panels under the steer…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos