Do it yourself
Frequently asked questions about cars and motorcycles

How do you deactivate the traction control of the Renault Clio?

Model: Renault Clio Clio IV, MK 4, Clio 4 - Years 2012-2019
Part: Checks and maintenance

The traction control of the Renault Clio can be deactivated by inserting the ignition key into the ignition switch and turning it to turn on the instrument panel: once the instrument panel is turned on, it will be possible to hold down the button located on the dashboard next to the steering wheel. After a few moments with the button pressed, it will be possible to notice that the warning light of the car skidding will appear on the instrument panel, indicating that the traction control has been deactivated; pressing it again will make the warning light turn off.

Posted on 9 January 2026 by ScegliAuto

Video tutorial

Related tutorials

Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) To disable the traction control on the Renault Clio, connect the diagnostic tool to the OBD port of the vehicle, located below the steering column. O…
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) To disable the traction control on the Renault Clio, open the fuse box located inside the cabin, at the lower left of the dashboard relative to the s…
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) In order to deactivate the traction control of the Renault Clio, you need to connect a diagnostic tool to the OBD port of the vehicle. Once the conne…

Other guides you may be interested in

    Frequently Asked Questions

    • Clio 2012-2019 - What to do if the traction control on a Renault Clio does not start? Read answer
    • Clio 1998-2005 - Where is the heater resistor located on the Renault Clio mk2? Read answer
    • Clio 2012-2019 - Why is the Renault Clio USB port not working? Read answer
    • Clio 2012-2019 - Why does the touch screen not work in the Renault Clio? Read answer
    • Clio 2005-2013 - Where is the horn of a Renault Clio located? Read answer
    • Clio 2005-2013 - What to do if the Renault Clio horn does not work? Read answer

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos