Do it yourself
Frequently asked questions about cars and motorcycles

How to deactivate the traction control on the Renault Clio?

Model: Renault Clio MK 3, Clio 3, Clio III - Years 2005-2013
Part: Checks and maintenance

To deactivate the traction control on the Renault Clio, insert the ignition key into the ignition switch and turn it to power on the instrument cluster. Once the cluster is on, press and hold the button located on the dashboard next to the steering wheel. After a few seconds with the button pressed, you will notice the car skidding warning light appear on the instrument cluster, indicating that the traction control has been deactivated; pressing it again will make the light disappear.

Updated on 16 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) To disable the traction control on the Renault Clio, open the fuse box located inside the cabin, at the lower left of the dashboard relative to the s…
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) To disable the traction control on the Renault Clio, connect the diagnostic tool to the OBD port of the vehicle, located below the steering column. O…
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) In order to deactivate the traction control of the Renault Clio, you need to connect a diagnostic tool to the OBD port of the vehicle. Once the conne…

Other guides you may be interested in

    Frequently Asked Questions

    • Clio 2012-2019 - What to do if the traction control on a Renault Clio does not start? Read answer
    • Clio 1998-2005 - Where is the heater resistor located on the Renault Clio mk2? Read answer
    • Clio 2012-2019 - Why is the Renault Clio USB port not working? Read answer
    • Clio 2012-2019 - Why does the touch screen not work in the Renault Clio? Read answer
    • Clio 2005-2013 - Where is the horn of a Renault Clio located? Read answer
    • Clio 2005-2013 - What to do if the Renault Clio horn does not work? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos