|
Do it yourself
| |||
| ||||
Installation and Operation of the TPMS
Model: Renault Clio
Clio V, Clio 5
- Years:
2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Video tutorial
The video shows the installation of new TPMS sensors on a Renault Clio V after the previous ones, purchased online, had a very short lifespan. New quality sensors were purchased on Amazon with code B07N84LY93 for £55.98, with free delivery. The condition of the tyres, brake pads, CV joints, gaiters, and LPG filter is checked, and everything is in order. The balancing weights are moved inside the spokes of the wheel for aesthetic reasons. The old sensor, secured with a screw, is removed, while the new BMS sensor is installed using a specific tool that pushes the valve into the wheel. This procedure is repeated for all four tyres. The codes of the new sensors are then entered into the control unit, and the necessary parameters are activated: navigation, ABS, temperature, etc. The pressure is only read when the vehicle is in motion. A road test is then conducted to verify that the system reads the values correctly; the system will also alert in case of too high or too low pressure. The message the YouTuber wants to convey is: beware of overly cheap TPMS, which have a limited lifespan.
Posted on 13 September 2026 by ScegliAuto
Related tutorials
Renault Clio
(2012-2019 /
Clio IV, Clio 4, MK 4)
The pollen filter is very important as it protects against external agents that can enter the cabin. It is advisable to replace the filter every 6,20…
Renault Clio
(2019-2026 /
Clio V, Clio 5)
Today we will see how to reset the tire pressure warning light (TPMS) of the Renault Clio; before performing the reset, it is necessary that all four…
Renault Clio
(2012-2019 /
Clio IV, Clio 4, MK 4)
Today we will explain how to reset the TPMS light on the Renault Clio 4. To reset the light, we need to turn on the instrument panel and press the BC…
Other guides you may be interested in
|
Where is the Battery Located on the Toyota Hybrid Yaris?
Unlike many Toyota models, the Hybrid Yaris places the battery inside the vehicle. The battery of the Toyota Hybrid Yaris is located within the cabin, specifically under the right rear seat. If you need to access the battery, you must remove the rear seat, the screws securing the cover, and the hard plastic cover. Once these obstacles are removed, you can access the battery compartment and perform the necessary maintenance. Remember, if you need to disconnect the battery, always remove the positive terminal first, followed by the negative. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.037
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |