Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Cabin Air Filter

Model: Renault Clio Clio IV, MK 4, Clio 4 - Years 2012-2019
Part: Cabin air filter

The pollen filter is very important as it protects against external agents that can enter the cabin. It is advisable to replace the filter every 6,200 miles or once a year. You can find good quality filters at a reasonable price in auto parts stores. The filter is located beneath the glove compartment. Be careful with the installation direction of the filter, which is usually indicated on the product itself. The airflow must follow the correct installation direction for proper operation and effective filtration. When you turn on the air, you will notice that it is much cleaner.

Updated on 22 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Cabin Air Filter
Replacing the Cabin Air Filter
Renault Clio (1998-2005 / Clio 2, MK 2) .. reassemble the plastic grille and the seal. When replacing the cabin air filter, it is also advisable to sanitise the cabin with a suitable germicidal.. …
Replacement of Cabin Air Filter
Replacement of Cabin Air Filter
Renault Clio (1998-2005 / Clio 2, MK 2) The cabin air filter is located in the engine compartment, on the passenger side, just below the windscreen: first, remove the seal on the edge, then…
How to Change the Cabin Filter on a Renault Clio
How to Change the Cabin Filter on a Renault Clio
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) .. Changing a worn cabin filter? Let's look at replacing the cabin air filter on a Renault Clio. Disconnect the plastic cover of the air filter housing.. …

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos