|
Do it yourself
| |||
| ||||
How to Remove the Glove Compartment of the Renault Clio
Model: Renault Clio
Clio IV, Clio 4, MK 4
- Years:
2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Video tutorial
Below is the procedure to remove and replace the glove compartment of the Renault Clio. First, open the front passenger door and start to open the glove compartment, unscrewing the fastening screws found inside; then remove the plastic cover on the side by prying it with something thin, as shown in the video. At this point, remove the glove compartment from the dashboard, carry out the repair or directly replace it, applying the reverse procedure for reassembly!
Updated on 25 July 2026 by ScegliAuto
Related tutorials
Renault Clio
(2005-2013 /
Clio 3, MK 3, Clio III)
Before starting, open the front passenger door of your Renault Clio. Begin by opening the glove compartment door. Next, dislodge and remove the upper…
Renault Clio
(2005-2013 /
Clio 3, MK 3, Clio III)
To carry out this operation, you will need to open the front passenger door to extract the panel covering the side of the glove compartment. This wil…
Renault Clio
(2012-2019 /
Clio IV, Clio 4, MK 4)
To remove the cabin filter from the Renault Clio, open the glove compartment located on the passenger side: beneath the glove compartment, you will f…
Other guides you may be interested in
|
How to Reset the AdBlue Warning Light on a Peugeot Boxer
To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.042
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |