Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Brake Pads on a Renault Clio III

Model: Renault Clio Clio 3, MK 3, Clio III - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Brake pads

See other generations:
Video tutorial

To replace the front brake pads on a Renault Clio III, start by purchasing Brembo pads on eBay with code 272825496362 for £27.45. Open the cap of the brake fluid reservoir to avoid overpressure. Lift the car and remove the wheel.

Using a flat screwdriver, compress the piston of the caliper to create space. Remove the caliper fixing screws and detach it. Slide out the old pads and clean the bracket with a wire brush.

Apply copper grease to the ends of the new pads and insert them. Refit the caliper and tighten the screws.

Reattach the reservoir cap. Pump the brake pedal to bring the pads closer to the disc and drive cautiously for the first 31 miles.


Posted on 2 September 2026 by ScegliAuto


Related tutorials

Replacing the Front Brake Pads on a Renault Clio
Replacing the Front Brake Pads on a Renault Clio
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) This guide will show you the procedure for removing and replacing the front brake pads on a Renault Clio. First, lift the vehicle and remove the fron…
How to change the front brake pads on the Renault Clio 4
How to change the front brake pads on the Renault Clio 4
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) In this video, you will see step-by-step instructions for removing and replacing the front brake pads on the fourth generation Renault Clio. First, l…
Replacing Front Brake Pads on Renault Clio 2
Replacing Front Brake Pads on Renault Clio 2
Renault Clio (1998-2005 / MK 2, Clio 2) In this video tutorial, you will learn how to disassemble and replace the front brake pads on a Renault Clio 2. First, unscrew the bolts from the whe…

Other guides you may be interested in

    Frequently Asked Questions

    • Clio 2012-2019 - How much does it cost to replace the brake pads on the Renault Clio? Read answer

How to Activate the Disabled TRC on the Toyota Yaris?

As the video clearly shows, disabling or activating the traction control (TRC or ESP) on the Toyota Yaris is very simple. By default, the traction system activates every time the vehicle is started. To disable it, simply press the button depicting a skidding car located in the centre of the vehicle where the controls are, such as the hazard lights and the radio, but near the handbrake. Once disabled, the TRC off light will illuminate on the dashboard. To reactivate it, just press the same button again.

Watch the video!


by ScegliAuto

More videos