Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Windscreen Washer Pump on a Renault Clio?

Model: Renault Clio Clio 2, MK 2 - Years 1998-2005
Part: Pump

To replace the windscreen washer pump on a Renault Clio, you need to loosen the screws that secure the trim panel at the base of the windscreen. Before you can remove it, loosen the screws that secure the wiper blades to their mounts. These must be completely removed to detach the corresponding trim panel. At this point, you can locate the underlying washer pump, which needs to be freed from the securing screws and the appropriate pipes. Then, insert the new pump and reassemble all components.

Posted on 11 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace Windscreen Washer Pump on Renault Clio MK2
How to Replace Windscreen Washer Pump on Renault Clio MK2
Renault Clio (1998-2005 / Clio 2, MK 2) In this guide, remove and replace the windscreen washer pump on a second series Renault Clio in simple steps. First, open the bonnet of your car and …
Removing the Windscreen Wiper Pump on a Renault Clio MK2
Removing the Windscreen Wiper Pump on a Renault Clio MK2
Renault Clio (1998-2005 / Clio 2, MK 2) In today's video, we will see the steps to remove and replace the windscreen washer pump on a Renault Clio second series. First, open the bonnet of y…
How to Remove the Fuel Pump from a Renault Clio
How to Remove the Fuel Pump from a Renault Clio
Renault Clio (1998-2005 / Clio 2, MK 2) How do you remove the fuel pump from a Renault Clio? Disconnect the battery cables, then remove the rear seat cushions from the car. Use a socket spa…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos