Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Windscreen Washer Pump on a Renault Clio MK3

Model: Renault Clio Clio 3, MK 3, Clio III - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Checks and maintenance

See other generations:
Video tutorial

In this video, see how to replace the windscreen washer pump on a Renault Clio III. First, open the bonnet. The pump is located near the windscreen washer fluid filler neck, but it is quite low down, so you will need to access it from the right-hand wheel arch.

Remove the wheel and all the plastic screws holding the wheel arch in place. The pump is right at the junction of the two halves of the wheel arch.

Remove it by lifting the tab of the electrical connector. You can find the new pump, for example, on eBay with the code 372690359898, priced at £12.58 with free delivery.

Always check the compatibility of the part with your vehicle. Finally, connect the new unit to the electrical connector and test it before reassembling everything.

Refit it into the reservoir hole; if it works, you can put the wheel arch back in place, then the wheel, and your job is done.


Updated on 8 October 2026 by ScegliAuto


Related tutorials

How to Replace the Windscreen Washer Pump on a Renault Clio?
How to Replace the Windscreen Washer Pump on a Renault Clio?
Renault Clio (1998-2005 / MK 2, Clio 2) To replace the windscreen washer pump on a Renault Clio, you need to loosen the screws that secure the trim panel at the base of the windscreen. Befo…
How to Replace Windscreen Washer Pump on Renault Clio MK2
How to Replace Windscreen Washer Pump on Renault Clio MK2
Renault Clio (1998-2005 / MK 2, Clio 2) In this guide, remove and replace the windscreen washer pump on a second series Renault Clio in simple steps. First, open the bonnet of your car and …
Removing the Windscreen Wiper Pump on a Renault Clio MK2
Removing the Windscreen Wiper Pump on a Renault Clio MK2
Renault Clio (1998-2005 / MK 2, Clio 2) In today's video, we will see the steps to remove and replace the windscreen washer pump on a Renault Clio second series. First, open the bonnet of y…

    Frequently Asked Questions

    • Clio 2012-2019 - What to do if the traction control on a Renault Clio does not start? Read answer
    • Clio 2012-2019 - Why is the Renault Clio USB port not working? Read answer
    • Clio 2005-2013 - Where is the horn of a Renault Clio located? Read answer

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos