Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Spare Wheel from a Renault Clio IV

Model: Renault Clio Clio IV, MK 4, Clio 4 - Years 2012-2019
Part: Wheel

To remove the spare wheel from a Renault Clio IV, open the tailgate and lift the boot mat. Remove the tool kit and the plastic cover that contains it; under the cover, there is a mechanism with a knob connected to a steel cable, and you will need to unscrew the knob counterclockwise to release the wheel. Push the black handle forward to lower the spare wheel beneath the vehicle. Pull the wheel outwards and disconnect the metal cable from the support. Once the spare wheel has been used, you can fit a new one. Position the wheel on the support with the valve facing down and attach the metal cable to the wheel. Lift the wheel upwards, pulling the vertical handle until you hear a "click" of locking in the mechanism; tighten the knob clockwise and place the tools and mat back inside the boot.

Posted on 19 September 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) In this short video, you will see the procedure necessary to remove and reattach the spare wheel from its compartment in the Renault Clio. First, ope…
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) On board the Renault Clio, the spare wheel is located in the lower part of the trunk, under the car's floor: to remove it from its housing, you will …
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) In this video tutorial, see how to remove and reattach the spare wheel from its compartment in the Renault Clio by following these simple and quick s…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos