Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Attach the Spare Wheel of the Renault Clio

Model: Renault Clio Clio IV, MK 4, Clio 4 - Years 2012-2019
Part: Wheel

In this short video, you will see the procedure necessary to remove and reattach the spare wheel from its compartment in the Renault Clio. First, open the tailgate and lift the floor; then unscrew the plastic screw to lower the spare wheel found under the vehicle, disconnecting the metal wire. Next, replace the wheel with the spare and reinsert the punctured wheel onto the filter, then screw and tighten the screw; put all tools back in place and lower the shelf again.

Updated on 7 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Release the Spare Wheel in a Renault Clio?
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) This video demonstrates how to release the spare wheel in a Renault Clio, useful in case of a puncture. First, remove the base of the boot, then open…
How to Replace the Wheel with the Spare on a Renault Clio
How to Replace the Wheel with the Spare on a Renault Clio
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) In this short and simple guide, you will learn how to replace the wheel with the spare on a Renault Clio. First, move to the rear of the vehicle and …
How to Remove and Reattach the Spare Wheel of the Renault Clio
How to Remove and Reattach the Spare Wheel of the Renault Clio
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) In this video tutorial, see how to remove and reattach the spare wheel from its compartment in the Renault Clio by following these simple and quick s…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos