Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove and Reattach the Spare Wheel of the Renault Clio

Model: Renault Clio MK 3, Clio 3, Clio III - Years 2005-2013
Part: Wheel

In this video tutorial, see how to remove and reattach the spare wheel from its compartment in the Renault Clio by following these simple and quick steps. First, open the boot's tailgate and start lifting the floor panel or covering; then unscrew the plastic screw that holds the spare wheel, which is located underneath the vehicle, as shown in the video. At this point, remove the wheel from the hub and replace the flat tyre; finally, put the wheel back in its compartment, tightening the screw by applying the reverse procedure!

Updated on 7 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Attach the Spare Wheel of the Renault Clio
How to Attach the Spare Wheel of the Renault Clio
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) In this short video, you will see the procedure necessary to remove and reattach the spare wheel from its compartment in the Renault Clio. First, ope…
How to Release the Spare Wheel in a Renault Clio?
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) This video demonstrates how to release the spare wheel in a Renault Clio, useful in case of a puncture. First, remove the base of the boot, then open…
Where is the spare wheel of the Renault Clio IV located?
Where is the spare wheel of the Renault Clio IV located?
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) On all cars, there is a spare wheel or an emergency repair kit in case we find ourselves with a flat tire. On all Renault Clio mk4 models, the spare …

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos