Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Front Brake Pads on a Renault Clio MK3

Model: Renault Clio - Years 2005-2013
Part: Brake pads

To replace the front brake pads on a Renault Clio MK3, you will need 13 mm and 15 mm socket and combination spanners, a torque wrench, a flat screwdriver, a wire brush, and copper grease. Open the bonnet and unscrew the cap of the brake fluid reservoir to prevent spillage when pushing back the piston. Slightly loosen the wheel bolts, lift the car, place it on axle stands, and remove the wheel. Using a flat screwdriver, lever the outer pad to push back the caliper piston. Unscrew the two bolts securing the caliper (13 mm spanner, holding the pin with a 15 mm spanner). Do not let the caliper hang from the brake hose: suspend it with a wire to the suspension. Remove the old pads and anti-noise shims. Clean the bracket and guides with the wire brush. Apply copper grease to the edges of the new pads and the shims. Insert them into the bracket with the friction material facing the disc. Refit the caliper and tighten the bolts to 32 Nm. Refit the wheel and tighten in a criss-cross pattern. Lower the car. Before driving, press the brake pedal several times to bring the piston back into contact with the pads. Recheck the brake fluid level and top up if necessary.

Posted on 4 October 2026 by ScegliAuto

Video tutorial

Related tutorials

How to change the front brake pads on the Renault Clio 4
How to change the front brake pads on the Renault Clio 4
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) In this video, you will see step-by-step instructions for removing and replacing the front brake pads on the fourth generation Renault Clio. First, l…
Replacement of the front brake pads of the Renault Clio
Replacement of the front brake pads of the Renault Clio
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) The instructions in this guide will show us the process of disassembling and replacing the front brake pads of the Renault Clio. First, lift the vehi…
How to change the front brake pads of the Renault Clio IV
How to change the front brake pads of the Renault Clio IV
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) Let's see how to change the front brake pads of a Renault Clio IV: we start by unscrewing the cap of the brake fluid reservoir, then loosen the wheel…

Other guides you may be interested in

Resetting the Tyre Pressure Warning Light on the Hyundai I20

The following instructions will show you how to reset the tyre pressure warning light on the Hyundai I20; before performing the reset, ensure that all four tyres are at the correct operating pressure. Then, get in the vehicle and turn on the ignition; press and hold the TPMS button located on the controls to the left of the steering wheel, as well as on the dashboard, as shown in the video. If the tyre pressures are correct, the warning light will automatically reset on the instrument panel; finally, turn off the ignition and start the engine!

Watch the video!


by ScegliAuto

More videos