Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Open the Fuel Flap on a Hyundai i10

Model: Hyundai I10 IA, MK 2 - Years 2013-2020
Part: Fuel cap

As clearly shown in the video, opening the fuel flap (petrol) on your Hyundai i10 is very simple. Unlike other cars where you just press the fuel tank flap to open it, the Hyundai i10 operates differently. Near the driver's front seat, to the left, you will find a small tab depicting a fuel pump. Lift it and your fuel flap will automatically open. At this point, you will be able to refuel by unscrewing the cap.

Updated on 29 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Fuel Pump on a Hyundai i10 1.2
How to Replace the Fuel Pump on a Hyundai i10 1.2
Hyundai I10 (2007-2013 / PA, MK 1) Briefly review the steps to remove and replace the fuel pump on the Hyundai i10 1.2. First, open the rear doors and begin removing the rear seat; und…
When to replace the timing belt of a Hyundai I10?
When to replace the timing belt of a Hyundai I10?
Hyundai I10 (2007-2013 / PA, MK 1) The replacement of the timing belt on a first-generation Hyundai i10 (2007-2013), both with a 1.1 MPI (petrol) engine and a 1.2 MPI (petrol) engine, …
Clutch Replacement on the Hyundai I10 1.1 Petrol
Clutch Replacement on the Hyundai I10 1.1 Petrol
Hyundai I10 (2007-2013 / PA, MK 1) In this video tutorial, discover the steps to perform a DIY clutch change on the first series Hyundai I10 with a 1.1 petrol engine. First, lift the v…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos