Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Pump on a Hyundai i10 1.2

Model: Hyundai I10 PA, MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Fuel pump

See other generations:
Video tutorial

Briefly review the steps to remove and replace the fuel pump on the Hyundai i10 1.2. First, open the rear doors and begin removing the rear seat; underneath, you will find the fuel pump cover, which you will remove to access the pump, as shown in the video.

At this point, unscrew the retaining ring and disconnect the electrical connector and fuel line, thus removing the fuel pump from the tank; replace it with the new original one, applying the reverse procedure!


Updated on 8 September 2026 by ScegliAuto


Related tutorials

How to Replace the Fuel Pump on a Hyundai I10
How to Replace the Fuel Pump on a Hyundai I10
Hyundai I10 (2007-2013 / PA, MK 1) In this video tutorial, see how to replace the fuel pump on a Hyundai I10 by following some essential steps: first, get into the vehicle, turn off th…
How to Replace the Fuel Filter on a Hyundai I10?
How to Replace the Fuel Filter on a Hyundai I10?
Hyundai I10 (2007-2013 / PA, MK 1) To replace the fuel filter on a Hyundai I10, lift the rear seats to access the fuel pump located underneath. Remove the cover to gain access, then di…
How to Open the Fuel Flap on a Hyundai i10
How to Open the Fuel Flap on a Hyundai i10
Hyundai I10 (2013-2020 / MK 2, IA) As clearly shown in the video, opening the fuel flap (petrol) on your Hyundai i10 is very simple. Unlike other cars where you just press the fuel tan…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos