Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Pump in the Hyundai I10?

Model: Hyundai I10 IA, MK 2 - Years 2013-2020
Part: Fuel pump

In this tutorial, you will see how to replace the fuel pump in the Hyundai I10, a very simple and quick operation. First, ensure that the instrument panel is off for safety, then open the rear doors, grasp the seat cushion and separate it from the base by pulling it upwards. Next, open the large cap just released, disconnect both the power connector and the two fuel pipes, and unscrew the various fixing nuts. At this point, simply extract the pump from its housing, insert the replacement, and reassemble everything following the reverse procedure.

Posted on 28 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Fuel Pump on a Hyundai i10 1.2
How to Replace the Fuel Pump on a Hyundai i10 1.2
Hyundai I10 (2007-2013 / PA, MK 1) Briefly review the steps to remove and replace the fuel pump on the Hyundai i10 1.2. First, open the rear doors and begin removing the rear seat; und…
How to Replace the Fuel Pump on a Hyundai I10
How to Replace the Fuel Pump on a Hyundai I10
Hyundai I10 (2007-2013 / PA, MK 1) In this video tutorial, see how to replace the fuel pump on a Hyundai I10 by following some essential steps: first, get into the vehicle, turn off th…
How to Replace the Fuel Filter on a Hyundai I10?
How to Replace the Fuel Filter on a Hyundai I10?
Hyundai I10 (2007-2013 / PA, MK 1) To replace the fuel filter on a Hyundai I10, lift the rear seats to access the fuel pump located underneath. Remove the cover to gain access, then di…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos