Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Water Pump on the Hyundai I10

Model: Hyundai I10 PA, MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Pump

See other generations:
Video tutorial

Replacing the water pump on a Hyundai I10 vehicle is a fairly straightforward task to perform independently. The water pump is located near the engine, behind the timing belt.

To replace the water pump, loosen the timing belt by loosening the pulley to remove the belt. Then, you can unscrew the nuts securing the pump and the connector.

Remove the pump and insert the new one, reconnect it to the connector, and tighten the nuts before re-tensioning the timing belt by tightening the pulley and the tensioner.


Updated on 31 October 2026 by ScegliAuto


Related tutorials

How to Change the Timing Belt and Water Pump on a Hyundai i10 1.1
How to Change the Timing Belt and Water Pump on a Hyundai i10 1.1
Hyundai I10 (2007-2013 / PA, MK 1) In this guide, you will find instructions to remove and replace the timing belt and water pump on a Hyundai i10 1.1. First, raise the vehicle and rem…
How to Replace the Fuel Pump on a Hyundai i10 1.2
How to Replace the Fuel Pump on a Hyundai i10 1.2
Hyundai I10 (2007-2013 / PA, MK 1) Briefly review the steps to remove and replace the fuel pump on the Hyundai i10 1.2. First, open the rear doors and begin removing the rear seat; und…
How to Replace the Fuel Filter on a Hyundai I10?
How to Replace the Fuel Filter on a Hyundai I10?
Hyundai I10 (2007-2013 / PA, MK 1) To replace the fuel filter on a Hyundai I10, lift the rear seats to access the fuel pump located underneath. Remove the cover to gain access, then di…

Other guides you may be interested in

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos