Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the Engine Oil Pump on a Hyundai i10 1.0L

Model: Hyundai I10 PA, MK 1 - Years 2007-2013
Part: Pump

In this guide, we will cover the main instructions on how to disassemble and replace the engine oil pump on a Hyundai i10 1.0L. To access the oil pump or the oil impeller, it is necessary to remove the entire engine block, separating the cylinder head; the oil pump is located on the side, requiring the removal of the timing components and various pulleys to access it, as illustrated in the video. At this point, it will be possible to carry out the replacement by installing the new original part; carefully reassemble all elements of the engine block, testing its operation.

Posted on 12 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the water pump of the Hyundai I10
How to replace the water pump of the Hyundai I10
Hyundai I10 (2007-2013 / PA, MK 1) Replacing the water pump of a Hyundai i10 vehicle is a fairly simple operation to perform independently. The water pump of the Hyundai is located nea…
How to Replace the Fuel Pump on a Hyundai i10 1.2
How to Replace the Fuel Pump on a Hyundai i10 1.2
Hyundai I10 (2007-2013 / PA, MK 1) Briefly review the steps to remove and replace the fuel pump on the Hyundai i10 1.2. First, open the rear doors and begin removing the rear seat; und…
How to Change the Timing Belt and Water Pump on a Hyundai i10 1.1
How to Change the Timing Belt and Water Pump on a Hyundai i10 1.1
Hyundai I10 (2007-2013 / PA, MK 1) In this guide, you will find instructions to remove and replace the timing belt and water pump on a Hyundai i10 1.1. First, raise the vehicle and rem…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos