Do it yourself
Frequently asked questions about cars and motorcycles

How to change the engine oil in the Hyundai Santa Fe

Model: Hyundai Santa Fe MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Engine oil

See other generations:
Video tutorial

On the Hyundai Santa Fe, the oil change is done from underneath, accessing through a small hatch in the lower protection. The video starts from there: open the hatch and create space to reach both the drain plug and the filter area, allowing you to work without removing the entire cover.

With the container ready underneath, loosen the sump plug on the Hyundai Santa Fe and let the oil drain, ensuring the stream goes well into the container. Once the drain is underway and the area is clear, move to the oil filter: access it from the same opening, unscrew and remove it carefully as it is normal for some oil to still leak out. Before fitting the replacement, prepare the new filter by applying a thin layer of oil on the seal to ensure a good fit and facilitate closure.

Then screw the filter in place and tighten it without forcing, keeping your hand steady and aligned correctly in the opening. Once the underside is complete, close the hatch of the lower protection and return to the engine compartment of the Hyundai Santa Fe for topping up: the video shows the use of a funnel to add oil through the filler cap.


Posted on 7 August 2026 by ScegliAuto


Related tutorials

Hyundai Santa Fe (2012-2018 / MK 3) How to change engine oil on a Hyundai Santa Fe? This is a simple operation if you follow the correct steps. Lift the car on a column lift or jack, af…
Hyundai Santa Fe (2006-2012 / MK 2) The steps to follow to reset the oil light on the 2011 Hyundai Santa Fe are: - Keep the instrument panel off; - Press the brake pedal three times in …
Hyundai Santa Fe (2006-2012 / MK 2) Today's instructions will allow us to carry out the routine maintenance check, replacing the engine oil and oil filter of the Hyundai Santa Fe 3.5 V6…

Other guides you may be interested in

How to Reset the SOS System Error on the Audi A4

This guide provides information on how to restore the functionality of the SOS emergency call system on the Audi A4. The SOS system is now available on almost all models from the manufacturer; one of the most common issues is related to the malfunction of the SOS system, for which we will outline possible solutions. The issue can sometimes be resolved by resetting the MMI multimedia system by holding down the power button; otherwise, it will be necessary to perform a diagnostic check at the nearest service center.

Watch the video!


by ScegliAuto

More videos