Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Oil and Filter Replacement

Model: Hyundai Santa Fe MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Oil filter

See other generations:
Video tutorial

Open the front bonnet and remove the plastic cover on the engine: the engine oil filter housing is located on the side and can be easily recognised as it has a large nut on top. To remove the filter, unscrew this cap, detach the filter, and remove the old O-ring seal.

Insert the new filter, apply the new seal to the cap, coat it with clean oil, and screw it back on without exceeding the torque specification.

While changing the filter, it is also advisable to replace the engine oil by draining the old oil through the drain plug located under the sump.


Updated on 15 February 2026 by ScegliAuto


Related tutorials

Engine Oil and Filter Replacement
Engine Oil and Filter Replacement
Hyundai Santa Fe (2000-2006 / MK 1) Position the vehicle on suitable ramps to lift it slightly and facilitate access to the oil sump; unscrew the engine oil filler cap to allow air to e…
How to replace the engine oil of the Hyundai Santa Fe 3.5 V6
How to replace the engine oil of the Hyundai Santa Fe 3.5 V6
Hyundai Santa Fe (2006-2012 / MK 2) Today's instructions will allow us to carry out the routine maintenance check, replacing the engine oil and oil filter of the Hyundai Santa Fe 3.5 V6…
How to Replace Engine Oil and Filter on Hyundai Santa Fe
How to Replace Engine Oil and Filter on Hyundai Santa Fe
Hyundai Santa Fe (2006-2012 / MK 2) How to replace engine oil and filter on a Hyundai Santa Fe? Follow this guide to proceed with the replacement. Lift the car with a column lift/jack a…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos