|
Do it yourself
| |||
| ||||
Hyundai Santa Fe - Oil filterOil Filter Hyundai Santa Fe (2012-2018 / mk 3)
Hyundai Santa Fe (2000-2006 / MK 1)Engine Oil and Filter Replacement Position the vehicle on suitable ramps to lift it slightly and facilitate access to the oil sump; unscrew the engine oil filler cap to allow air to enter and …Read all… Posted on 23 February 2026 by ScegliAuto
Hyundai Santa Fe (2012-2018 / MK 3)Engine Oil and Filter Replacement Open the front bonnet and remove the plastic cover on the engine: the engine oil filter housing is located on the side and can be easily recognised as it has a …Read all… Posted on 23 February 2026 by ScegliAuto Oil Filter Hyundai Santa Fe (2000-2006 / mk 1)
Hyundai Santa Fe (2000-2006 / MK 1)Engine Oil and Filter Replacement Position the vehicle on suitable ramps to lift it slightly and facilitate access to the oil sump; unscrew the engine oil filler cap to allow air to enter and …Read all… Posted on 23 February 2026 by ScegliAuto
Hyundai Santa Fe (2012-2018 / MK 3)Engine Oil and Filter Replacement Open the front bonnet and remove the plastic cover on the engine: the engine oil filter housing is located on the side and can be easily recognised as it has a …Read all… Posted on 23 February 2026 by ScegliAuto Alternator (5) Speaker (1) Shocks (7) Air conditioning (2) Car stereo (4) Anti-roll bar (1) Battery (5) Control arm (5) Spark plugs (4) Glow plugs (1) Key (20) Timing belt (8) Air conditioner (1) Onboard computer (1) Checks and maintenance (14) Dashboard (3) Bearing (1) Brake rotors (3) Headlight (9) Tail light (1) Fog lights (1) Air filter (6) Cabin air filter (14) Diesel fuel filter (3) Oil filter (2) Window switch (2) Accessory kit (2) Light bulb (1) Headlight bulb (4) Tail light bulb (1) Interior dome light bulb (1) Instrument panel light (2) License plate light (2) Handle (1) Engine (7) Starter motor (1) Transmission fluid (5) Brake fluid (1) Engine oil (7) Clock (4) Door trim panel (1) Front bumper (2) Rear bumper (1) Brake pads (5) Hydraulic pistons (1) Tires (1) Shift knob (1) Pump (1) Fuel pump (2) Radiator (3) Wheel (1) Fuse box (24) Seat (1) Crankshaft position sensor (3) Suspension system (1) Side mirror (2) Warning light – error code (13) Tire pressure warning light (5) Service warning light (42) Fuel cap (2) Windshield wipers (5) Valve (1) Blower motor (1) |
How to Open the Bonnet on the Mitsubishi L200?
In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.007
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |