Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Hyundai
  4. :
  5. Santa Fe
  6. : Radiator

Hyundai Santa Fe - Radiator

Radiator Hyundai Santa Fe (2000-2006 / mk 1)

Hyundai Santa Fe (2000-2006 / MK 1)
How to Remove the Cooling Radiator from the Hyundai Santa Fe

Here are the main instructions for removing and replacing the cooling radiator on the Hyundai Santa Fe. First, open the bonnet and start removing the front …Read all…
Posted on 17 October 2026 by ScegliAuto
Hyundai Santa Fe (2000-2006 / MK 1)
How to Replace the Air Conditioning Radiator on a Hyundai Santa Fe

This guide outlines the steps to remove and replace the air conditioning radiator on a Hyundai Santa Fe, following the instructions below. First, open the …Read all…
Posted on 3 September 2026 by ScegliAuto
Hyundai Santa Fe (2000-2006 / MK 1)
Instructions for Radiator Replacement

If you need to replace the radiator, it is recommended to carry out this maintenance with the engine cold as you will need to drain the coolant; start by …Read all…
Posted on 27 February 2026 by ScegliAuto

Alternator (5) Speaker (1) Shocks (7) Air conditioning (2) Car stereo (4) Anti-roll bar (1) Battery (5) Control arm (5) Spark plugs (4) Glow plugs (1) Key (20) Timing belt (8) Air conditioner (1) Onboard computer (1) Checks and maintenance (14) Dashboard (3) Bearing (1) Brake rotors (3) Headlight (9) Tail light (1) Fog lights (1) Air filter (6) Cabin air filter (14) Diesel fuel filter (3) Oil filter (2) Window switch (2) Accessory kit (2) Light bulb (1) Headlight bulb (4) Tail light bulb (1) Interior dome light bulb (1) Instrument panel light (2) License plate light (2) Handle (1) Engine (7) Starter motor (1) Transmission fluid (5) Brake fluid (1) Engine oil (7) Clock (4) Door trim panel (1) Front bumper (2) Rear bumper (1) Brake pads (5) Hydraulic pistons (1) Tires (1) Shift knob (1) Pump (1) Fuel pump (2) Radiator (3) Wheel (1) Fuse box (24) Seat (1) Crankshaft position sensor (3) Suspension system (1) Side mirror (2) Warning light – error code (13) Tire pressure warning light (5) Service warning light (42) Fuel cap (2) Windshield wipers (5) Valve (1) Blower motor (1)

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos