Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Hyundai
  4. :
  5. Santa Fe
  6. : How to replace the air conditioning radiator on Hyundai Santa Fe

Hyundai Santa Fe - Video tutorial

Model: Hyundai Santa Fe MK 1 - Years 2000-2006
Part: Radiator
Operation: How to replace the air conditioning radiator on Hyundai Santa Fe

Let's see in this guide the steps that will allow us to disassemble and replace the air conditioning radiator of the Hyundai Santa Fe, following the instructions below. First we open the bonnet of our car and begin to disassemble and remove the bumper grille; then we unscrew the screws of the front bumper that we find at the top and bottom, using a 10 mm socket wrench, to remove it, as shown in the video. At this point we are going to remove the fan and then the radiator, disconnecting the pipes; we apply the reverse procedure for reassembly!


Posted on 1 November 2022 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos