Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Hyundai
    3. :
  3. Santa Fe
    4. : Rear bumper replacement on Hyundai Santa Fe

Hyundai Santa Fe - Video tutorial

Model: Hyundai Santa Fe MK 3 - Years 2012-2018
Part: Front bumper
Operation: Rear bumper replacement on Hyundai Santa Fe

Let's see the disassembly of the front bumper of a Hyundai Tucson. We lift the front hood of the car and find the screws that we are going to remove. We remove and tightening screws placed in the upper part of the bumper. Once the screws in the upper part have been removed, unscrew the screws placed in the stone guards and remove the screws located in the lower part of the bumper (we lift the car with a jack). We remove the bumper from the car body with our hands; we carry out the necessary maintenance on the bumper or on the front of the car. We mount the front bumper once the maintenance is finished.


Posted on 18 January 2024 by ScegliAuto



How do you remove the front headlight of the Hyundai Santa Fe?
Hyundai Santa Fe (2012-2018 / MK 3) In order to remove the front headlight of the Hyundai Santa Fe, you need to loosen all the screws that secure the front bumper to its housing: these
How to replace the air conditioning radiator on Hyundai Santa Fe
Hyundai Santa Fe (2000-2006 / MK 1) Let's see in this guide the steps that will allow us to disassemble and replace the air conditioning radiator of the Hyundai Santa Fe, following the
How do you remove the rear light of the Hyundai Santa Fe?
Hyundai Santa Fe (2019-2024 / MK 4, TM) In order to remove the rear light of the Hyundai Santa Fe, you need to open the rear door so that you have access to the plastic panel located next t

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos