Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Bumper and Headlight of a Hyundai Kona

Model: Hyundai Kona MK 1 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Front bumper

See other generations:
Video tutorial

To remove the front bumper of the Hyundai Kona, start by removing the securing clips located under the bumper at the bottom of the car. Open the bonnet and remove all those found at the top (screws and clips). Now turn the wheel fully to the left (for the left side) and fully to the right (for the right side) to create space in the wheel arch and remove the clips present.

Under the engine, there is a protective panel: remove the bolts securing it to the chassis and connecting it to the bumper. Now the bumper is only secured by side snap clips and some electrical connectors (for fog lights, parking sensors, or front camera).

Once the bumper is removed, the headlights are easily accessible: after removing the securing screws, the headlight can be pulled forward, but remember to disconnect the electrical connector.


Posted on 2 June 2026 by ScegliAuto


Related tutorials

How to disassemble the front bumper of the Hyundai Kona
How to disassemble the front bumper of the Hyundai Kona
Hyundai Kona (2017-2023 / MK 1) Today we will explain how to remove the front bumper of the Hyundai Kona. To remove the bumper, we need to detach the trim located between the right …
How to Remove the Front Bumper on the 2024 Hyundai Kona
How to Remove the Front Bumper on the 2024 Hyundai Kona
Hyundai Kona (2023-2026 / MK 2) To replace the headlight bulbs on a 2024 Hyundai Kona, you need to remove the front bumper first. In this short video, we will explain how to remove …
Replacing the Headlight Bulb on the Hyundai Kona
Replacing the Headlight Bulb on the Hyundai Kona
Hyundai Kona (2017-2023 / MK 1) Today, you will see the procedure that will allow you to remove and replace the headlight bulb on the Hyundai Kona. First, open the bonnet and start …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos