Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the front bumper of the Hyundai Kona

Model: Hyundai Kona MK 1 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Front bumper

See other generations:
Video tutorial

Today we will explain how to remove the front bumper of the Hyundai Kona. To remove the bumper, we need to detach the trim located between the right and left side of the bumper and the wheel arch, being careful not to damage the clips. Using a 25mm Torx key, unscrew the side screws.

Remove the red locking clips on the bottom of the bumper and unscrew the screws. Disconnect the central connector to release the front of the bumper.

After removing the bumper, we can perform maintenance and inspection work that a vehicle needs, such as replacing the front headlights.


Posted on 15 October 2025 by ScegliAuto


Related tutorials

How to Remove the Front Bumper on the 2024 Hyundai Kona
How to Remove the Front Bumper on the 2024 Hyundai Kona
Hyundai Kona (2023-2026 / MK 2) To replace the headlight bulbs on a 2024 Hyundai Kona, you need to remove the front bumper first. In this short video, we will explain how to remove …
How to Remove the Front Bumper and Headlight of a Hyundai Kona
How to Remove the Front Bumper and Headlight of a Hyundai Kona
Hyundai Kona (2017-2023 / MK 1) To remove the front bumper of the Hyundai Kona, start by removing the securing clips located under the bumper at the bottom of the car. Open the bonn…
How do you remove the rear bumper of the Hyundai Kona?
How do you remove the rear bumper of the Hyundai Kona?
Hyundai Kona (2017-2023 / MK 1) To remove the rear bumper of the Hyundai Kona, you need to open the tailgate so that you can locate the screws that secure the bumper from the top. O…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos