Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to release the spare wheel on a Hyundai Santa Fe?

Model: Hyundai Santa Fe MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Wheel

See other generations:
Video tutorial

In this tutorial, you will learn how to release the spare wheel on a Hyundai Santa Fe, a very simple and quick operation to perform if you need to replace a flat tyre. First, open the boot lid, then retrieve the tools provided with the vehicle and locate the hole inside the basket, positioned right in front of the outer edge.

Next, loosen the bolt accessible from the hole, lay the wheel on the ground, and detach it from the relevant cord. To return it to position, simply follow the reverse procedure.


Updated on 8 September 2026 by ScegliAuto


Related tutorials

Replace Brake Pads on a Hyundai Santa Fe
Replace Brake Pads on a Hyundai Santa Fe
Hyundai Santa Fe (2000-2006 / MK 1) Need to replace the front brake pads? Here’s how to do it on a Hyundai Santa Fe. Lift the vehicle on a column lift to the desired height, remove the …
Replacing the Crankshaft Position Sensor on the Hyundai Santa Fe 2.4L
Replacing the Crankshaft Position Sensor on the Hyundai Santa Fe 2.4L
Hyundai Santa Fe (2000-2006 / MK 1) Today's guide will illustrate the necessary steps to dismantle and replace the crankshaft position sensor on the Hyundai Santa Fe 2.4L. First, open t…
How to Reset the Service Light of the Hyundai Santa Fe
How to Reset the Service Light of the Hyundai Santa Fe
Hyundai Santa Fe (2019-2023 / TM, MK 4) By following the steps in this guide, you will be able to complete the manual reset of the service light on your Hyundai Santa Fe in just a few secon…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos